img_9173
The lathe tool carrier is mounted. Photo: Mads Stenfatt.
img_3030
Drilling of the center hole in the lathe tool carrier for the pipe miller. Photo: Rune Henssel.
img_3022
Drilling of the center hole in the lathe tool carrier for the pipe miller. Photo: Rune Henssel.
img_2984
Test assembly of the bearing frame for the pipe miller. Photo: Rune Henssel.
img_2974
Fabrication of the bearing frame for the pipe miller. Photo: Rune Henssel.
img_2967
The pipe has been cut to length. Photo: Rune Henssel.
img_2964
The pipe on the scales. Photo: Rune Henssel.
img_2958
Jens is marking the cutting line. Photo: Rune Henssel.
img_2957
Ceci ne pas une capsule spatiale. A large pipe cutter fabricated by Martin has been loaded with the pipe for SCTA01. Photo: Rune Henssel.
